Management of Powdery Mildew in Beans (2024)

Qingren Wang, Shouan Zhang, and Teresa Olczyk

Powdery mildew, caused by the fungal organism Erysiphe polygoni, is one of the most commonly occurring diseases on many types of beans. Green beans, pole bean, long bean, Italian bean, and snow pea crops are all susceptible to powdery mildew in tropical and subtropical climates. Although the causal organism rarely causes extensive damage, significant yield losses (up to 69%) were reported in Columbia County when infection occurred in dry beans prior to flowering (Schwarts et al. 2005). Accurately identifying this disease and immediately taking action for control are critical to effectively prevent spread of powdery mildew in order to reduce significant losses of yield and quality.

Symptoms

Powdery mildew can affect all above-ground parts of bean plants. Initial symptoms appear as small and white talcum-like spots (Figure 1), which most commonly are seen on the upper surface of leaves. These spots increase in size and run together to form a whitish, powdery growth, gradually spread over a large area of the leaves (Figures 2, 3, and 4), and can spread even farther to the stems. As the symptoms develop, infected leaves may gradually curl downward, color changed from pale yellow to brown (Figure 5), die, and fall off. Under severe conditions, the entire leaves and plants could be covered by white cottony mycelial growth of the fungus (Figure 6). Symptoms on infected leaves may vary with bean varieties, but powdery mildew may cause the leaves to be twisted, buckled, or distorted. The powdery mildew fungus usually does not grow on bean pods except pea pods (Davis et al. n.d.). However, powdery mildew spots can develop on snap bean pods (Pernezny and Stall 2005). The development of powdery mildew symptoms is not often observed on pole bean in Miami-Dade County, but it is apparent on both Italian bean and long bean (dark green type) (Figures 7 and 8) grown under the same conditions. Severely infested plants may have reduced yields, shortened production periods, and even completely die (Figure 8). Severe symptoms of powdery mildew infection can also be seen in snap beans when humidity is high (Figure 9).

Management of Powdery Mildew in Beans (1)
Management of Powdery Mildew in Beans (2)
Management of Powdery Mildew in Beans (3)
Management of Powdery Mildew in Beans (4)
Management of Powdery Mildew in Beans (5)
Management of Powdery Mildew in Beans (6)
Management of Powdery Mildew in Beans (7)
Management of Powdery Mildew in Beans (8)
Management of Powdery Mildew in Beans (9)

Infection and Spread

The fungus of powdery mildew grows as thin layers of mycelium (fungal tissue) on the surface of the affected leaves. Spores, which are the primary means of dispersal, make up the bulk of the visible white, powdery growth. Powdery mildew spores can be easily carried by wind to new hosts. The spores can germinate and infect beans in the absence of free water. Powdery mildew growth generally does not require moist conditions (Davis et al. n.d.); however, increased humidity can increase the severity of the disease (Pernezny and Stall 2005). Moderate temperatures (60°F to 80°F) and shady conditions generally are the most favorable environmental factors for the development of powdery mildew (Figure 6). Strong and direct sunlight with high temperatures (over 90°F) can noticeably reduce the incidence of the disease.

Management Practices

Preventive Practices

Prevention is the optimal method for controlling powdery mildew. Growing resistant varieties or cultivars of beans wherever available, planting in full sun, and following good cultural practices can adequately control powdery mildew in most cases.

Cultural Practices

Plant in sunny areas as much as possible and provide good air circulation. Overhead watering may help reduce powdery mildew, because spores might be washed off the plants. However, such a measure may contribute to other pest management concerns.

Fungicide Application

In vegetable fields, the least-toxic fungicides may be used to prevent, protect from, or eradicate powdery mildew. Apply protective fungicides to highly susceptible varieties before the disease appears, and utilize eradicative fungicides at the earliest signs of the disease. Once powdery mildew growth becomes prevalent, control with any fungicide can be difficult. Table 1 lists recommendations for fungicides for control of powdery mildew on beans. Make sure to follow the application instructions on the labels.

References

Davis, R. M., W. D. Gubler, S. T. Koike, M. L. Flint, and P. N. Galin. n.d. Plant Pathology, UC Statewide IPM Program, University of California, Davis, CA 95616.

Pernezney, K., and W. M. Stall. 2005. Powdery Mildew of Vegetables. PP-14. Gainesville: University of Florida Institute of Food and Agricultural Sciences.

Schwarts, it al H. F., J. R. Stedman, R. Hall, and R. L. Forster. 2005. Compendium of Bean Diseases, Second Edition. The American Phytopathological Society.

Table 1.

Fungicide recommendations for powdery mildew control on beans.

Publication #PP311

Release Date:November 10, 2020

Reviewed At:October 24, 2023

Related Experts

Zhang, Shouan

Specialist/SSA/RSA

University of Florida

Wang, Qingren

County agent

University of Florida

Olczyk, Teresa

University of Florida

Related Units

Management of Powdery Mildew in Beans (10)

Plant Pathology

Management of Powdery Mildew in Beans (11)

Tropical REC

Related Topics

Legume Diseases

Management of Powdery Mildew in Beans (12)

About this Publication

This document is PP311, one of a series of the Plant Pathology Department, UF/IFAS Extension. Original publication date May 2014. Revised June 2017 and March 2020. Visit the EDIS website athttps://edis.ifas.ufl.edufor the currently supported version of this publication.

About the Authors

Qingren Wang, commercial vegetable Extension agent and pesticide trainer, UF/IFAS Extension Miami-Dade County; Shouan Zhang, professor, Plant Pathology Department, UF/IFAS Tropical Research and Education Center; and Teresa Olczyk, director, UF/IFAS Extension Miami-Dade County; UF/IFAS Extension, Gainesville, FL 32611.

Contacts

  • Qingren Wang
Management of Powdery Mildew in Beans (2024)

FAQs

Management of Powdery Mildew in Beans? ›

If you have plants that develop powdery mildew habitually, apply a preventive fungicide early in the plant's development. That means prior to flowers and fruit. Avoid eradicant fungicides, which will kill existing diseases but can contaminate fruit. Apply sulfur early in the season to protect plants from infection.

How to treat powdery mildew on beans? ›

The fungal spores overwinter on plant debris, so clean up the beds in fall. Also make sure the plants are well fed and watered. Some cucurbit varieties are resistant (marked PM). You can try controlling the infection by spraying affected leaves with compost tea or urine (diluted with 4 parts water).

What is the best management strategy for powdery mildew? ›

Management. The best method of control is prevention. Planting resistant vegetable varieties when available, or avoiding the most susceptible varieties, planting in the full sun, and following good cultural practices will adequately control powdery mildew in many cases (Table 1).

What is the best treatment for powdery mildew? ›

Home treatments for powdery mildew include: A 10% milk solution – simply mix milk and water and give your plants a thorough spray. Baking soda fungicide solution – to 500ml water, add one to three teaspoons of bicarbonate of soda, one teaspoon of vegetable oil, a little squirt of eco-detergent to act as an emulsifier.

What is the chemical management of powdery mildew? ›

In order to control powdery mildew, three sprays of fungicides are recommended. The first spray comprising of wettable sulphur (0.2%, i.e., 2g per litre of water) should be done when the panicles are 8 -10 cm in size as a preventive spray.

Which fungicide is best for powdery mildew? ›

Sulfur (Bonide Sulfur Plant Fungicide) and copper fungicides (BONIDE Copper Fungicide Dust) can prevent powdery mildew issues and control existing fungal problems. Rinse foliage with SuffOil-X on a regular spray schedule for continued control of powdery mildew issues.

How do you remediate powdery mildew? ›

Potassium bicarbonate: Mix 1 tablespoon potassium bicarbonate and ½ teaspoon liquid soap (not detergent) in 1 gallon of water. Spray liberally to all affected areas. This mixture may work better than baking soda as a treatment for existing infections. Milk: Mix 1 part milk to 2 to 3 parts water and spray liberally.

Is vinegar or baking soda better for powdery mildew? ›

The acetic acid present in vinegar will change the fungus pH, killing the disease effectively. Try a baking soda solution (one tablespoon baking soda, one teaspoon horticultural oil, one teaspoon liquid soap in a gallon of water) on affected areas every one to two weeks.

Is Dawn dish soap good for powdery mildew? ›

The solution may be even more effective when a few drops of dishwashing soap or insecticidal soap are added as a wetting agent. Spray on both the upper and lower leaf surfaces. This solution sucks the moisture out of the fungal hyphae in a process referred to as osmotic shock.

What is a systemic fungicide for powdery mildew? ›

Myclobutanil, propiconazole, and thiophanate-methyl have systemic properties and can be sprayed less often than chlorothalonil, sulfur, or copper-based fungicides.

Can plants recover from powdery mildew? ›

Fortunately, the symptoms of powdery mildew are usually worse than the actual damage. Rarely is it fatal to the plant.

What fertilizer is good for powdery mildew? ›

As soon as you notice any infected or dead leaves, remove them. Be cautious not to over-fertilize, since this can make the plant more susceptible to disease. Regularly apply organic sulfur-based fungicides, which are useful for both preventing and treating powdery mildew.

How often should I spray baking soda for powdery mildew? ›

Start by mixing 1 tablespoon of baking soda in a gallon of water. Add a teaspoon of insecticidal soap OR lightweight horticulture oil to act as a spread sticker for the solution. Spray the plants at first sign of the disease. Repeat every 7 to 10 days throughout the season.

Will vinegar treat powdery mildew? ›

Mix four tablespoons of vinegar to a gallon of water, and spray the mixture every three days until the mildew has been cured. The acetic acid present in vinegar will change the fungus pH, killing the disease effectively.

How do you treat powdery mildew on edible plants? ›

Powdery mildew can be treated early on with fungicides including potassium bicarbonate, neem oil, sulfur, or copper. Home remedies like baking soda and milk can also be successful treatments when applied properly.

Top Articles
Latest Posts
Article information

Author: Annamae Dooley

Last Updated:

Views: 6050

Rating: 4.4 / 5 (65 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Annamae Dooley

Birthday: 2001-07-26

Address: 9687 Tambra Meadow, Bradleyhaven, TN 53219

Phone: +9316045904039

Job: Future Coordinator

Hobby: Archery, Couponing, Poi, Kite flying, Knitting, Rappelling, Baseball

Introduction: My name is Annamae Dooley, I am a witty, quaint, lovely, clever, rich, sparkling, powerful person who loves writing and wants to share my knowledge and understanding with you.