Vegan Peanut Butter Fudge Recipe - Build Your Bite (2024)

FAQs

What causes peanut butter fudge not to harden? ›

Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft. A temperature of 112°C to 114°C (234°F to 237°F) must be maintained.

We'll say it again: resist stirring.

Fudge is a lesson in chemistry—and also a lesson in patience and restraint. After the mixture raches the soft-ball stage, you want to let the fudge cool to about 115° without stirring. Potential grainy moment: If you stir your fudge before it cools to 115 ° F crystals can form.

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft.

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

there is too much leftover water in the syrup and the resulting fudge is soft. To save the fudge, put it in a saucepan with 15 to 30 ml (1 or 2 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil until the thermometer reaches 114 to 115 °C (237 to 239 °F).

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Don't stir!

Once the fudge reaches soft-ball stage on the candy thermometer, remove from the heat and let the temperature drop to 110°F. Keep that spoon or spatula out of the pot until this happens. If you stir too early in the process, you'll make the sugar crystals too big and end up with grainy fudge.

The most common culprit behind unset fudge is inaccurate temperature control. If the sugar mixture hasn't reached the correct temperature, your fudge won't set. Ensure you use a reliable candy thermometer and follow temperature guidelines meticulously to achieve the desired consistency.

By cooling the fudge prior to agitation (like in the recipes included in this article), on the other hand, you'll get much smaller, finer sugar crystals and a finished fudge with a smooth, creamy texture. Cool the mixture until it reads 120° F on the thermometer—no stirring. This can take 1 to 1/2 hours.

Good use of failed fudge: fudge that is too hard, too soft, too runny, too sugary, too chewy, etc. Proportions are as follows: for every 2 cups (roughly 1 pound yield) of any failed fudge that is not runny, you'll need 1 egg, ½ cup all-purpose flour, and ½ cup milk. If fudge is soupy, halve the milk (to ¼ cup).

Why does my fudge crumble when I cut it? ›

The ingredients for fudge are combined and cooked to 234 degrees, cooled to 110 degrees without stirring, then beaten until creamy. Candy that isn't cooked long enough will end up too soft; overcooking makes fudge crumbly or hard.

Tiny microcrystals in fudge are what give it its firm texture. The crystals are small enough, however, that they don't feel grainy on your tongue, but smooth. While you ultimately want crystals to form, it's important that they don't form too early.

The fudge is then beaten as this makes the fudge slightly crumbly rather than chewy. Beating the mixture encourages the formation of small sugar crystals, which leads to the crumbly texture. The crystals may not be noticeable in themselves but the fudge mixture will thicken and turn from shiny to matte in appearance.

Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start.

Chewy fudge results from the excessive moisture present in the mixture, which means the fudge was not cooked to the right temperature and could not be cooked enough to release the moisture. However, take care not to overcook fudge because it will take away the moisture and leave you with hard, chewy candy.

The ratio of chocolate to condensed milk needs to be just right, otherwise you might end up with fudge that is too soft or too hard. Do not freeze the fudge to set it. Best way is to just be patient for a couple hours and set it in the fridge. If your fudge hasn't set, then you've gone wrong somewhere else.

Fudge is best stored at room temperature for 2 to 3 weeks wrapped up in its original wax paper. NEVER REFRIGERATE your fudge as this will draw out the moisture and leave you with dry, crumbly fudge.

We like to set this fudge in the freezer to make it quicker! Once you add the fudge to your pan it will need just 30 minutes in the freezer to set.