How to Prevent Your Cheesecake Water Bath from Leaking (2024)

FAQs

Why does cheesecake leaking liquid? ›

Liquid can also come out of a cheesecake if it is overbaked as the proteins in the cream cheese mixture start to tighten too much and squeeze out the water. The cheesecake should still be quite jiggly when it comes out of the oven, even though it will have risen and formed a crust on the surface.

How to keep a springform pan from leaking. To prevent your pan from leaking, you can wrap the outer bottom edge of the pan with heavy duty aluminum foil. If you're making cheesecake, this will also help prevent water from leaking into your pan when placed in a water bath.

Don't overbake your cake.

It may crack if it's too dry. Many people overbake their recipes to “play it safe”. The golden rule is if it no longer trembles in the center, it will set firmly in the refrigerator. Tap the pan on the sides and if the center has firmed up like jello, remove the cake from the oven.

You only need about 2 to 3 inches of water. I like to stop pouring when the water is halfway up the side of the cheesecake pan. Essentially you want enough water that it won't quickly evaporate during the baking process, but not so much that it'll splash up or touch your cheesecake batter.

You can absolutely make a cheesecake without a traditional water bath. The traditional water bath provides two elements: a steamy, humid oven environment that prevents your cheesecake from drying out on top and insulation for protecting the cheesecake from drastic temperature changes.

If your cheesecake filling goes soupy in texture, don't worry—you can fix it! Just add a little gelatin to the mix, and it will set up in the fridge just fine. The trick is to use just enough gelatin so you don't end up with a jello texture for your cheesecake.

And here's how to do it:

Fold up the sides of the foil, tightly wrapping the exterior of the cheesecake pan on the bottom and up the sides. If you pre-baked the crust, be extra careful if the pan is still hot! This foil wrap prevents water from seeping in through your springform pan. Boil water.

If you know you have water in your cheesecake, all is not necessarily lost. If this happens to you, you can try to save it if you catch it before it has finished baking. Remove the roasting pan from the oven. Use oven proof mitts to grab the edges of the spring form pan and lift it out of the pan of water.

New York cheesecake is heavy on the cream cheese which is why it's so dense and rich. Extra cream cheese isn't the only thing that makes New York cheesecake so special. It also includes extra eggs and egg yolks to provide and smooth consistency.

A water bath helps cheesecakes cook evenly, ensuring the edges don't bake faster than the center. The process gently bakes the custard slowly, ensuring a smooth and creamy filling. Otherwise, the dessert may get a rubbery texture. It also prevents cracking along the surface and browning on the top.

Why is my cheesecake still wet in the middle? ›

You might worry a runny middle means raw cheesecake, but it's totally safe and normal. The center will firm up as it cools on a cooling rack, resulting in the smooth surface you want. Test Kitchen Tip: Cheesecakes made with sour cream should jiggle a little more and will have a larger soft spot in the center.

Set the springform pan (be careful if it's hot from the oven!) on top of the foil, and tightly wrap the foil around the outside of the pan. This will prevent any water from leaking into the cheesecake.

Wrapping the two-part springform pan in foil is insurance to keep water from getting in.

Tip: To get more crispness in the cheesecake base, brush some lightly beaten egg white over the surface of the biscuit layer before you bake it. The egg wash will form a layer between the cheesecake base and filling, and this will help to reduce the amount of moisture penetrating the biscuit base.