7 Common Mistakes to Avoid for Candy Shop-Worthy Fudge and Caramels (2024)

FAQs

7 Common Mistakes to Avoid for Candy Shop-Worthy Fudge and Caramels? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer.

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

As water gradually evaporates, sugar is concentrated and the temperature of the mixture rises above 100°C (212°F). If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard.

Not Controlling the Crystals

The main goal in candy making is to control the formation of sugar crystals. If you have a lot of sugar crystals forming on the sides of the pan, your candy will be too grainy. Always stir gently to avoid splashing the candy mixture onto the sides of the pan.

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.

The trick to good homemade fudge is to cook the ingredients to the right temperature to form a sugar syrup, and cool the mixture properly so the texture of the fudge turns out smooth and firm, but soft enough to cut.

Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture. As you beat the fudge, pay attention to color and texture. Once the fudge loses its sheen and thickens, put down your spoon.

Rock Hard Fudge

Beating the cooled batter is one of the crucial steps of fudge-making, but overbeating can turn fudge hard as a rock.

What happens if you don't stir fudge? ›

By letting the fudge cool without stirring, you avoid creating seed crystals. Stirring would help sucrose molecules "find" one another and start forming crystals. Stirring also introduces air, dust, and small dried bits from the walls of the saucepan—all potential seeds for crystal formation.

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

Cook over medium-high heat, stirring nearly constantly until the mixture reaches a boil. Stop stirring once it reaches a boil! Use a wet brush to wash the crystals from the sides of the pot, then let the mixture boil.

High-quality fudge tastes smooth and creamy because it contains small sugar crystals. It has a deep brown color and a satiny sheen. Poor-quality fudge tastes grainy because it contains large sugar crystals.

Choose the right butter – You can use salted or unsalted butter, though using salted gives it a bit of contrast, like salted caramel. If you'd prefer to enjoy the richness of chocolate, choose unsalted butter. Don't over-stir the fudge.

For best results, restrict candy making to days when the relative humidity is below 35 percent.

If caramels are too soft, that means the temperature didn't get high enough. Again place the caramel back into a sauce pan with a couple of tablespoons of water and heat to 244°F. If you don't have a candy thermometer, you can test with a cold water test.

Candy thermometers—like this instant-read thermometer—let you know exactly what stage the caramel is in (thread, soft-ball, firm-ball, hard-ball, soft crack or hard crack). It's an easy way to prevent soft caramel that won't set, which happens if the caramel doesn't reach a high enough temperature.

you simply haven't cooked it enough-- possibly your microwave is less powerful (the original recipe doesn't specify a wattage for cooking the caramel) or the butter you used has a higher water content. You could try cooking the mixture for a little longer, and seeing if it sets up firmer.